There’s a lot that goes into building interactive scenarios. Obviously content is king and critical to building a branched scenario that is both engaging and effective. One key part of the scenario construction is establishing context. The good thing is that a single image often suffices to establish the scenario context.

The free stock images I shared recently are perfect for building interactive scenarios and establishing visual context.

• Free illustrated scenario backgrounds
• Free office scenario backgrounds

I’ve had a few questions on how to set up the slides using the scenario images, so I’ll show a couple of easy ways to use them.

Interactive Scenarios: Create Multiple Layouts

You can create as many layouts as you like in the master slide. Thus you can create a scenario slide with dozens of layouts and save it as a template. Anytime you want to build a scenario, start with the scenario template and it saves you from looking for the images and inserting them into the slides. Everything’s already there and ready to go.

Here’s a quick tutorial to show how that works.

Click to view the scenario tutorial.

Interactive Scenarios: Create Multiple States

Another reusable option is to insert a background image and then establish a number of states for that image. You can set any state as the initial state and never have to access the other states. And if you want to be clever, you can use triggers to dynamically switch the background from one environment to another using a single image.

Here’s a quick tutorial that show how to set up the background states and dynamically change them with triggers.

Click to view the scenario tutorial.

There are advantages to each method:

• Working from the master slide means that the background image can be applied universally to the layout and impact all of the slides that use the layout.
• Working with image states on the slide level gives you more control over the background and how it’s used with triggers specific to that slide.
• There’s no reason you couldn’t apply the image states to the layouts which would mean fewer layouts. The layouts can be swapped using triggers and variables.

Key Point: it’s easy to get lost in building complex scenarios which can consume a lot of production time. I always work from the perspective of keeping production simple and as reusable as possible. And with Storyline 360, you can share with your co-workers using the team slides feature.

Inserting the images into a file and saving it as a template will save you lots of time and means you won’t have to dig around looking for the images. They’ll always be right at your fingertips.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

A while back I shared some free illustrated backgrounds that you can use for your branched scenario courses in e-learning. Those worked great for the classic illustrated characters.

I’ve been working on interactive scenarios for a few upcoming workshops and created some background images that we’ll use to build interactive branched scenarios. As you can see below, the backgrounds work well for the modern illustrated characters as well as with the photographic characters.

The free download includes the original images as well as a folder with images cropped to 16:9 so they fit perfectly in 16×9 slides.

Bonus Tip for Branched Scenario Images

One way to use the images, is to create a course file and insert all of the backgrounds on different layouts in the master slide. This way you can have one starter file for those interactive scenarios and then dynamically select the layout when creating new slides. Here’s a tutorial that shows how to create templates for reusable interactive scenarios.

Free Downloads

Here are links to download the backgrounds to use with your branched scenarios.

• Original scenarios for classic illustrated characters: Storyline file and PowerPoint file.
• Office scenarios for modern and photographic characters: download
• Branched Scenario Background Images – Hallways

I hope you can use them in your courses and for your branched scenarios. If you do, let me know.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

Some people asked how I created the animated .gifs similar to the ones I gave away for free in this recent blog post. So today I’ll share a simple way to create them.

Start with Animated .Gif Software

There are a number of tools to create animated .gifs. I’m going to focus on just one for this post.

ScreenToGif is free and you don’t need to install it. Just run the .EXE file. It’s a great product and I use it all the time for quick demos or some of the animations I use in the blog.

I’m not going to do an exhaustive overview, so I recommend downloading the app and playing with it a bit. It’s intuitive and easy to figure out. As a side note, if you do use it, I encourage supporting the developer.

Understanding the Cover Image .Gifs

Cover images are mostly decorative. And because of the responsive nature of the Rise courses, the cover image gets cropped based on the screen’s aspect ratio. That means what you see in portrait won’t look the same in landscape.

The key is keep the cover images simple. Animated .gifs can become very large files. The more visual information on the screen, the larger the file size. And if the file is too large, it’ll take too long to download and ruin the effect and experience.

Stick with fewer colors. Solid backgrounds are good because you don’t get that blocky color striping that you get with pictures.

We’ll look at two ways to create the cover image animated .gifs. One way is by recording something onscreen and the other is to import a video.

Record Screen to Create Animated .Gif

The easiest thing it to play a video and record the screen. Then do some basic editing. Since the animated .gif is decorative, you just need something simple. The key is not to have a massive file. The more you record, the larger the file.

View the animated .gif tutorial on Youtube

Once you have a recording, figure out what you want and where to cut it. Again, I look for something simple that looks good looping. Subtle movements or repeating animations (like a spinning gear) work perfectly.

It does take some messing around. I usually do a basic edit and then save the file to see how large it is. Then I play around with more edits and image size to find the right balance between quality and file size.

You’ll have a lot more luck recording vector images that are solid versus photos. The less the screen has to change from one frame to the next, the better quality you’ll get and smaller file size.

For the .gifs where the quality doesn’t look as good, I set the cover images’s overlay color darker. This way the text really pops off the screen and the animation quality isn’t as much of an issue. That’s what I did in this example where there were so many colors it just didn’t look as good as I wanted.

Import a Video to Create Animated .Gif

ScreenToGif makes it really easy to import a video. It breaks down all the frames and from there it’s just a matter of editing it to what you want.

Just like above, play around with different settings to see what gives you the right balance between file size and quality. And keep in mind, they’re header images so subtle movement is fine. For this overhead desk video, I just focused on the pencil moving and cut out hundreds of frames.

View the animated .gif tutorial on Youtube

Bonus tips:

• You won’t get crisp images because the file size needs to be manageable. I try not to go over 1.5 MB. That’s why you have to play around with settings that strike the right balance.
• You need to test different dimensions, but I generally keep the images somewhere between a 16:9 and 2:1 aspect ratio. There’s no golden rule. It’s mostly based on what you are showing. The image is going to crop based on the screen, anyway. I make different versions and modify the image size to see what I get for file size and quality.

• Solid and/or fewer colors is best. There are a lot of free or inexpensive ways to create simple vector-based animation videos. That’s what I did to create these two headers above which you can see in these two examples: Call Center and Team Meeting. I inserted some animated characters and published a video. Then I made the .gif from the video. Because I’m not building a big animated explainer video, this only took a few minutes to do and looks decent.

Animated .gifs add some flavor and visual novelty to your courses. And as you can see, they’re easy to create.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

I did a workshop on simple ways to create animated .gifs for e-learning courses. In part of the workshop we play around with using them as header graphics for Rise courses.

Header graphics are mostly decorative so the trick is to get decent enough quality while keeping the file size down (which is a major challenge with animated .gifs). I created a number of .gifs from some generic videos and figured I’d share them here for those who may be interested in using them.

Examples of Headers Using Animated Gifs

Here are some nice example courses that use .gifs. I think the animations really work well because they add some visual novelty and interest.

• Mars Rover: animated astronaut that I captured from a video
• Dog Care Basics: animated dog & cat; mostly static with a simple animation
• Futuro Space Training: vector-based animation; subtle movement

Click through the course examples because there are some other really cool uses of animated .gifs throughout.

Examples of Free Animated Gif Headers

Here are a few demos to see what they look like as headers in Rise courses. Personally, I am more partial to the vector examples. Which do you prefer?

• Whiteboard
• Moving Letters
• Overhead Table
• Vector: Call Center
• Vector: Team
• Vector: Office

There are more in the folder. You can download the animated .gifs here.

Keep in mind that these were used for training activities, but I did keep the headers somewhat generic so that they may be used in other projects. Hopefully you can use them and get some ideas on how you could create your own.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

PowerPoint’s one of my favorite multimedia applications. It’s easy to use, almost everyone has a copy so it’s easy to share what’s created, and it does more than create presentations.

In fact, I regularly use PowerPoint to create the graphics and custom assets for my e-learning courses. Here are a few examples:

• Character graphics: I used PowerPoint and Studio 360 to create a circle avatar graphic.

• Custom graphics: Here’s an example where I used PowerPoint to create the graphics for my Rise flash card interaction.

• 3D model interaction: In this example, I used PowerPoint to create the 3D Mars Rover interaction in Storyline.

As you can see, PowerPoint is great for all sorts of multimedia production especially when combined with great e-learning software.

Create a Shaped Video

Recently someone in the community asked how to create a circle-shaped video for an e-learning interaction in Storyline.

A real easy solution is to create an image with a circle hole in it and then place the video underneath only allowing the video to show through the circle hole. That’s fast and doesn’t require any editing of the video.

If you want a circle-shaped video, you can create one in a video editing application. However, this requires having a video-editing application that allows you to do that and also having the expertise to use the video editor (which most of us don’t have).

And this is where PowerPoint comes in handy. It’s a tool most of us have, and it can do exactly what you need with minimal effort.

Here’s a video tutorial that quickly walks through the steps outlined below.

• Customize slide size. A circle has a 1:1 aspect ratio. Change the custom slide size to 1:1 (something like 10″ wide and 10″ high). That should give you a video that’s almost 1000×1000 pixels.
• Insert a video. Choose your favorite video.
• Crop video to 1:1. Most likely the video is 16:9 or 4:3. You’ll need to crop it to 1:1 to get a perfect circle.
• Scale the video to fill the slide. You want the video to be as big as possible inside the slide.
• Save the file as video. Select .mp4. If you have an older version of PowerPoint you may have to save as .WMV. That’s OK, you can still use it in Storyline and Rise. You won’t get a circle video. The video is still going to be rectangular. But inside the rectangle will be the custom-shaped video.

Bonus tips:

• Play around with some of the video formatting options in PowerPoint. There are lots of neat things you can do.
• Same thing with animations and transitions. Anything you create in your PowerPoint slides can be save as video.
• The corners are not going to be transparent. You’ll want the video background to match the course background to get a seamless experience.

Hope that helps and is something you can use in an upcoming e-learning course.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

[UPDATE: this post is republished in the Tips & Tricks blog.]

In a recent post, I showed how I use PowerPoint to build the graphics for my Rise courses. I had a few questions on how to create the person sticking out of the circle image (apparently that is popular).  So today’s post shows how to do this. It’s pretty easy.

How to Create a 3D Pop-Out Graphic in PowerPoint

• Insert a character and crop it until it is square.
• Insert a circle.
• The circle and image should be a similar size.
• Crop the image to a circle shape.
• Position the character over the circle.
• Scale it up to suit your need for the overhanging image.
• Duplicate the character.
• Crop the first image to fit in the circle.
• Crop the second image and place on top of the first image to cover.
• Group together so you don’t accidentally nudge them out of place.

As you can see, it’s relatively simple to do. Then whatever you build in PowerPoint can be saved as an image. Either right-click it and save as .PNG or save the slide itself as .PNG.

Watch the tutorial below to get more of the specific detail. And here’s a bonus tutorial on how I created the 3D pop-out header image above.

Click here to view the YouTube tutorial.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

In a previous post, I shared how I built an interactive scenario in Rise. I’ve gotten lots of emails asking how I built the graphics like the headers and the flashcard interactions for the interactive scenario. So in today’s post, I’m going to show you a simple way to build graphics for your Rise e-learning courses.

Understanding the Image Blocks in Rise

Rise offers a number of blocks that support inserted images (such as image, gallery, and some of the interactions). Most them work perfectly in one of two aspect ratios:

• 1:1 (square)
• 16:9 (rectangle)

There are a few blocks that have text overlay where the image is scaled. Those are mostly decorative images so we won’t worry about them.

Understanding PowerPoint Slides

PowerPoint is easy-to-use screen and with some practice, you can build almost any type of visual. Because of this, I build my simple graphics in PowerPoint and save the slides as images.

In PowerPoint, we need to do two things: set slide size and then whatever we build we export as an image.

• Go to Design>Slide Size and modify the slide size.
• To save the slide as an image, go to Save As and choose an image format. You can save a single slide or all slides. I usually save in PNG format.

Create PowerPoint Graphics to Use in Rise

Since there are two aspect ratios, I create two PowerPoint files for my Rise graphics. One is 1:1 and the other is 16:9. You can see the PowerPoint files I created for the scenario demo.

PowerPoint is a freeform slide. I can build virtually anything I need quickly. In the interactive scenario, I created 1:1 images for the flashcards. One side of the flashcard has the question text and the other has the feedback.

I used the various image editing features in PowerPoint to colorize the graphics. I also used the emjoi features to create some simple feedback graphics. While it’s easy enough to build these graphics with other tools I just find PowerPoint to be easy and fast. However you’re not confined to PowerPoint, you can use the tool of your choice.

The images above are relatively simple. The images below required a bit more work. I had to build it so the character extends out of the frame. You can see that I created a couple of versions. I opted for the lighter version because it made the Rise screen seem more open with more white space.

When you’re all done building your slides, save the slides as images rather than a .pptx file. Then you’ll have a folder of images that work with your Rise courses.

Bonus PowerPoint Graphics Tip

With Articulate 360, you get Studio 360 that includes Presenter and works with PowerPoint. That means you have access to all of the Content Library characters and templates. So if you want the same Content Library characters in Rise, use PowerPoint slides to build the graphics like I did above.

Here’s another example I mocked up for the blog post using the same techniques.

So there you have it. In the first, post we looked at how to build the interactive scenario in Rise. And in this one, we reviewed how to use PowerPoint to quickly build the graphics you need.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

Over the years, I’ve posted hundreds of tutorials using PowerPoint. Some of them to be updated. Today I am going to cover five ways to use PowerPoint as an image editor. This is great for quick image editing or for those who don’t have other image editors on hand.

Save PowerPoint Content as an Image

Since we’re talking about PowerPoint as an image editor, the first tip is that whatever you create in PowerPoint can be saved as an image.

I usually group the objects so it’s one group. And then I right-click and save as picture. I like to save as a .PNG so that the transparent areas of the image are still transparent. If you save as .JPEG, the transparent areas will become white.

In the image below, I used PowerPoint to create the sandwich stack and then right-clicked to save as picture.

Create Custom-Sized PowerPoint Slides

You can make a PowerPoint slide any size you want. By default, they’re 16:9. That and 4:3 are the most common aspect ratios. However, by going to the Design Tab you can set the slides to any size. That means they can be tall and skinny or short and wide.

Why would someone want to do that? Check out the tip below.

Export PowerPoint Slides as Images

PowerPoint slides can be saved as images. That means you can add whatever you want to a slide, layer content, etc and then save that slide as an image. I do this quite a bit when I need to quickly build graphics for my e-learning courses.

For example, the flashcard interaction in Rise is a 1:1 aspect ratio. So I make a PowerPoint slide that is 1:1 and add my content to the slide. It’s a great way to add titles and images to the flashcards to make them visually richer.

Once I’ve completed the slide, I save the PowerPoint slides as images and insert them into the Rise interaction.

The images above were all created in PowerPoint as slides and inserted into the Rise course. You can see an example of the PowerPoint slide images in this demo course.

Using PowerPoint slides to create images is easy and it gives me more control over the images I use in my e-learning courses.

How to Extend a Photo’s Background

Sometimes you have images where the object is centered which makes it challenging to place other content on the screen. An easy way to fix this is to cut a slice from the image and stretch it. This lets you move the main object over and get some empty space for text or other content.

I also use this technique to quickly build slide layouts which I showed in this previous blog post on how to create a template from a single image.

• Tutorial: here’s a PowerPoint tutorial where I show two ways to extend the image: one where it’s really easy and one where the image doesn’t quite cooperate.

How to Remove the Backgrounds of Images in PowerPoint

Since PowerPoint 2010, you can use PowerPoint to remove backgrounds from your images. For the most part, it works well. Select your image and the remove background. You can select areas to keep and areas to remove. Once you’ve removed the background, you can play around with softening the edges to get rid of any obvious jaggedness.

• Tutorial: how to remove backgrounds of images in PowerPoint. Here’s an additional series of tutorials to help you customize how you use the background removal for effects.

As you can see, PowerPoint is a great tool for building simple illustrations or using it for quick graphics editing.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

The good news is that now you can edit SVG images in PowerPoint. And that’s a big deal because we’re starting to see more SVG images every day.

In fact, one of the sites where I buy images has the option to download SVG images. This is great because they can be edited and customized. However, to edit them requires knowing how to do so with an illustration program. Unless of course, you know how to use PowerPoint.

Insert & Edit SVG Image in PowerPoint

This first step is really easy. Insert a picture by using Insert>Pictures on the toolbar. Locate your SVG image and insert it. Voila! I will add, that I’ve had a few SVG files that didn’t work, but for the most part it’s been smooth sailing.

The next step is also very easy. What you’ll do is convert the SVG image into an object that can be edited in PowerPoint. The newest version of PowerPoint has a “Convert to Shape” feature. If you don’t see it in your version of PowerPoint, you’ll need to upgrade to the Office 365 version.

• Select the image
• In the format toolbar (or via right-click) select Convert to Shape. It will ask if you want to convert it.
• Once it’s converted, you need to ungroup the image. Right-click, and select Ungroup.
• Now the image is broken into multiple shapes where you can edit them as you wish.

Once the image is ungrouped you can edit it. For example, I removed the background content and just isolated the guy on the computer. now I can insert it anywhere I want. You can regroup the object and right-click to save as an image. I like to save as a PNG file so that the transparent part of the image remains transparent.

How to Edit SVG in PowerPoint Video Tutorial

Here’s a video tutorial where I show how to convert and edit an SVG in PowerPoint.

Click here to watch the YouTube tutorial.

As you can see, it’s super easy to edit SVG files in PowerPoint. That should open the doors to all sorts of possibilities as you find free SVG files at those various sites that offer free stock images.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

I shared a cool 3D interaction in a recent workshop demo and have had lots of people ask how I built it. You can check out the interaction in this Rise demo.

Creating the interaction is a two-step process:

• The first step is creating a video of the 3D model as it rotates in and out.
• The second step is to insert the video and add interactive elements in Storyline.
• In the case of the Mars Rover module, there’s a third step because inserted the interactive Storyline module into Rise. This is pretty cool because it allows for really simple and fast authoring in Rise, and then when I need custom interactions, I just build them in Storyline. It’s a win-win.

Here’s a previous post where I detailed more of the construction of the Rise demo. For today’s post, I’ll show you how to create the 3D video you’ll use for a Storyline interaction. The tutorial below shows how to create the video using 3D models in PowerPoint.

Click here to view the tutorial on YouTube.

Insert 3D Models in PowerPoint

PowerPoint comes with a number of 3D models. It also supports inserting models shared by the community. You can also build your own 3D models and insert them using standard 3D formats

Most likely you’ll want to insert your own 3D object. So it’s nice that PowerPoint supports the common 3D file formats. Here are the supported 3D formats for PowerPoint:

• .FBX
• .OBJ
• .3MF
• .PLY
• .STL
• .GLB

How to insert the 3D model in PowerPoint:

• Create a slide and then select a 3D object.
• Insert it just like you would a shape or picture.
• Position the object on the screen.
• Duplicate the slide (we’ll need this for the video).

Create the 3D Animation in PowerPoint

The first slide is the starting point from which the 3D object rotates. The second slide is the rotation point. You’ll need to rotate the object so that the position changes from slide 1 to slide 2. You can also move and scale it.

• Reposition the object by either scaling, rotating, or moving it on the slide.
• Go to slide transitions and select a morph transition for slide 2.
• Preview the slideshow.

On preview, you’ll see how the 3D object uses the morph transition to change positions. Pretty slick, huh?

Fine-tune Slide Transitions for 3D models in PowerPoint

That’s the essence of the 3D animation. Now it’s a matter of fine-tuning the animation by playing with the slide timings.

When all is done, the PowerPoint slides will be saved as a video file. That means the animations and transitions need to be automated.

• In the Transitions tab, go to Advance Slide and select to advance after X time. That means the slide will automatically advance at a certain time and doesn’t require you to do anything to trigger the slide movement.
• Slide 1 is just the starting point so it needs to advance as quickly as possible. I usually set it to advance after .25 seconds.
• Slide 2 will trigger the morph animation. On slide 2 you can change the speed of the 3D animation by changing the slide duration.
• Slide 3 (optional) is great if you want to create the sense that the object rotated in and out like the Mars Rover demo.

Save the PowerPoint file as a Video

When all is done, save the PowerPoint file as a video. You have two options: .MP4 and .WMV.

The MP4 format works well but I did find that when I use it with Storyline, the last part of the .MP4 always seems jumpy. It probably has to do with how the .MP4 is encoded by PowerPoint. So if I am using the video to build an interactive file, I save it as a .WMV. Then I let Storyline do the conversion. That resolves any issues you may experience.

That’s basically it for the 3D model video in PowerPoint. You create the two or three slides and save as video. Once you have the video, you can insert it into Storyline or anywhere else you use video. To make it an interactive video like I did with the 3D rover, you’ll need to tune in next week where I show how to create an interactive video in Storyline.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

In a previous post, we looked at when to use emojis in e-learning courses. There some good tips and comments in the post. Emojis add clever visual cues, but it is important to use them in a way that enhances the learning experience and doesn’t confuse it. So that’s always something to keep in mind.

The next question is how does one actually find and insert emojis. Today, I’ll show you three simple ways to add emojis to your e-learning courses.

Insert Emojis Using Keyboard Shortcuts

In Windows, you can add emojis using the keyboard shortcut [Windows Key + .]. And with a Mac, it’s [CTRL + CMD + Space]. I’m not sure what it is for Linux, but odds are you’re just sitting in a basement not communicating with people, so it’s probably not as critical.

I find that it can be a bit of a challenge when adding emojis via the Windows keyboard because I have to first activate the emoji screen and then start typing. But if nothing comes up while I type, I have to search; and it’s easy to accidentally add text and an emoji to what you’re typing on the screen.

Insert Emojis Using the Onscreen Windows Keyboard

I believe the Windows shortcut above was added in a recent version of Windows 10. If it doesn’t work for you, try accessing the touch keyboard. That’s been part of Windows for a while now.You can add it to the taskbar and then just click the icon to open the onscreen keyboard.

Insert Emojis Using a Browser Extension

Each browser is going to work different (and have different options) so you’ll need to learn how to do this in a browser other than Chrome which is what I use. I added the “Emoji for Google Chrome” extension to my browser. Whenever I want to insert an emoji, I just have to click on the icon and search. I then select the emoji which gets added to the holding cell and from there I just copy and paste it.

One thing to keep in mind is that the emojis will look different on different devices. For example, what you see in your browser may be different than what you see on a mobile device, which will look different than what you see in your document. They’ll still be emojis, but may not be as dynamic as the ones you inserted.

Do you have a different way of inserting emojis?

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.

Emojis are the today’s hieroglyphics. I can imagine thousands of years from now as archaeologists try to reconstruct our culture. They’ll spend years collecting emoji messages and then additional years to decipher them. And after all of that time, they’ll come to learn that we worshiped the goddesses known as Kardashians.

It’s a frightening thought indeed, but one we can counteract in how we use emojis in our training programs.

What Are Emojis? 😕

The first emojis started in Japan. It literally stands for picture character. They’re often used to add emotional context to messages. Although, often they’re combined to communicate more than quick emotional cues. There’s even an emoji version of Moby Dick.

You can learn more about emojis here:

• Emojipedia
• Wikipedia: Emoji

Emojis for E-Learning Require Context to Communicate 💬

The emoji is a tiny graphic that can be used to reinforce a point, add some emotional context, or a visual bookmark. Be careful when using them to communicate ideas because you may not communicate what you really intend.

Emojis are ambiguous and open to all sorts of misunderstanding and the emojis will appear different based on the device.

If you follow any of the heated discussions around emojis you’ll notice that they comfortably sit in a nest of political correctness. This is something to keep in mind when you deal with gender, skin tones, and cultural differences. You don’t want the emoji to distract from your message.

Emoji for E-Learning Examples 💻

Here are a couple of examples of how I used emojis in a recent Rise training session. In the image below, I used the emoji as a visual cue to add some context to the title. It also makes scanning the screen easier because the emojis do add contrast. It’s a simple use where the emojis adds something to the screen but doesn’t conflict with the content and is less open to misinterpretation.

One challenge, though, is that there may not be an emoji that works for the topic at hand. Then you have to get creative. Which goes back to the warning about miscommunication and ensuring that your creative use of the emoji still communicates what you intend.

In the “Health Supplies” title, I couldn’t find a first aid kit emoji so I used the hospital. It’s not perfect but does work.

In the next example below, I used the emojis as bullet points. I like this as it adds a bit more visual interest and shows each point as distinct. But again, the same issue exists when it comes to finding the emojis that work with your content.

There was no emoji for soap or toothbrush. So I went with shower and smiley face with nice teeth (and I assume healthy gums). And there’s not a lot of options for baby wipes thus I selected the baby.

As you can see, given the right content and some thought, emojis can play a role in your e-learning course. I’m curious if you’ve used emojis in any of your courses. If so, how? And also, how was it received? Feel free to share in the comments.

Events

Free E-Learning Resources

Want to learn more? Check out these articles and free resources in the community.	Here’s a great job board for e-learning, instructional design, and training jobs	Participate in the weekly e-learning challenges to sharpen your skills
Get your free PowerPoint templates and free graphics & stock images.	Lots of cool e-learning examples to check out and find inspiration.	Getting Started? This e-learning 101 series and the free e-books will help.